now it's starting to look like something!

Time for gluing all of the doors--but before we did that, we stood the cabinet up for the first time. The shims hold the doors square. It looks quite nice, if I do say so myself.

To get an idea of how the backing will look, we've propped up a few strips of the wainscoting. Here's a closer look:

At each of the four corners on the face frame, we are putting decorative walnut plugs. In addition, there are three plugs on each side piece to cover screw holes. After the glue has dried, we will sand them flush with the face frame.

muntins or mullions . . . or transoms?!!!

Today we mostly worked on fabricating the doors for the unit. Before that, however, I did a little more handwork--I sawed off all four legs to the finished length. If you click on the photo, you will see the less cosmetic side of furniture building: the glue and the screw holes. The glue will be sanded away and we are planning to cover the screw holes with pine plugs made from the wainscoting that will form the back of the unit. I think the contrasting woods will provide an interesting detail; however, that means that we must be quite precise when we are drilling the holes.

I've done a little research on some of the terminology that we have been using. According to Wikipedia, the muntins are the wooden spacers that divide the panes of glass from one another. The are also referred to as mullions. Another link suggests (to me, anyway) that the horizontal spacers are called transoms.

Whatever the label of its parts, the doors have many pieces that must be created and then put together via tenons and mortises. The tenon is the "tongue" that sticks out. The mortise is the recessed area in which the tenon is inserted. In this picture, Uncle Kenny tapers each edge--after it has been through the router.

Take a look at the finished product (prior to sanding.)

So, the majority of the day was spent measuring, making, and placing. When I left, we had a good start on the door frames. As Uncle Kenny warned, this is proving to be the most labor and time-intensive aspect of the build.

you just never know . . .

This afternoon as I returned to my classroom at the end of the day, I saw a person in military garb standing in the hallway outside my room. As I approached, I realized that it was a former student I first met 10 years ago when she was a freshman in high school.

Abby looked every bit the professional she is. As it turns out, she is stationed in Baghdad and is home on a two-week leave. In chatting with her, I found out that her unit of military police provided security for Saddam Hussein from the beginning of the trial through the execution.

The women in the unit had less contact than did the men, but she frequently encountered him in the hallways. I told her that I had read a news report that said Hussein was very complimentary of his American custodians. She said that he was quite gracious to them, his English was very good and he wore very nice suits.

She was in the secure area during the execution and witnessed the immediate aftermath of Iraqi reaction.

"Abby," I said, "you realize that you are living history, don't you?"

"Yes, I do."

As our visit concluded, she said, "Do you remember my freshman year when we had to write those research papers on a famous person? You handed me my topic and I asked, 'Who is this guy with the funny name, Saddam Hussein?'"

Pretty amazing . . .

iced dogwood

For those of you reading from more tropical climes, here's a little taste of what it looks like here in the Midwest.

photo bonanza!

Dwight calibrates the laser on the saw. While he was at it, he measured, cut, and glued the back legs for the cabinet.


The piece is really starting to look more like the finished project. Here we have begun laying out the doors. Plans are to mortise and tenon the corners of each of the four doors.

We are also planning to make plugs to cover a few, strategically placed screws. The plugs will be made out of the same pine wainscoting that will back the cabinet.

pine wainscoting for the back (from a neighboring farmhouse)













mockup of one of the door windows--one of . . . 30!.

the OSHA officer keeps a close eye out for any safety violations . . .








the mortising machine's work is done--not bad.


The picture below records an epiphanic moment for me. Although it doesn't look like much, this is one of the front legs that I tapered with a handsaw. What was the realization? Well, I loved that I could saw for a little bit, then take a break. Now, this is not a very big sawing job--even by hand--but I enjoyed myself immensely!

putting together the box

Since it is difficult to see much of the progress that has been made, I will just summarize. After gluing all of the boards, we sanded them all to the same depth, cut them to size and then cut the dados. Dados magically occur when many blades are put on the radial arm saw, while making sure that the blade is plumb, level, and whatever else. We then dry-fit the box and shelves, and then glued, "painted," and inserted biscuits.

There is quite a bit of measuring and re-measuring that goes on. Of course, many are familiar with the tape measure, but they may not know just how much complexity is involved in its operation. I suppose the tape measure could be considered a dangerous tool in certain situations, but the beauty of it definitely lies in the marvel of engineering this tool embodies.

First, one must master the different "parts" of the implement. I have always considered myself metrically-challenged; however, I am also somewhat educated and take pride in my ability to think quickly when warranted. So, when Jeff asked me which part of the tape measure I wanted to hold, I instinctively knew which end was mine. I believe the photo below adequately conveys what I am trying to say.

[All credit goes to Dwight for explaining its operation in terms that are amazingly simple, yet effective.]

Jeff stopped by for the actually glueing of the box and Aunt Beth was immediately enlisted to help spread glue and insert biscuits on the face frame. (I am making up terminology for the different parts of the project. My apologies to woodworkers all over the world who may never had heard of some of these labels . . .)

Here is what the project (and we) looked like when I left on Thursday evening.

sanding and sandwiches

After putting in about eight hours on the first day--not including Twinkie and Klondike bar breaks--we only worked for four hours on the second day. Today it was time to do some sanding. The sander bed is 16 inches wide, and that also happens to be the finished width of the shelves.

(I am making an attempt to honor an "anonymous" request for more pics of the chap in suspenders--see comments, "the first day" post).

About break time, Uncle Kenny asked if I would like a breath mint. My first instinct is to always question his motivation, and here follows the reason why.

"Well, I'm wondering if it's anything like your offer to me when I was about 12 years old?"

(setting switches to circa 1974)

"Hey, would you like a foxtail sandwich?'" When I replied in the affirmative on that fateful day long go, Uncle Kenny placed two foxtails in my mouth with the stems sticking out of either side.

"Are you really ready?" When I nodded, he quickly pulled on the stems, essentially leaving me with a mouthful of weed seeds.

So, I learned quite a lesson that day, and I was not surprised when his "breath mints" turned out to be . . . black walnuts.


breath mints

Above, Uncle Kenny demonstrates how we arrived at the dimensions for the architectural drawings of our "structure."